The purpose of this vignette is to introduce the `bdpbinomial`

function. `bdpbinomial`

is used for estimating posterior samples from a Binomial event rate outcome for clinical trials where an informative prior is used. In the parlance of clinical trials, the informative prior is derived from historical data. The weight given to the historical data is determined using what we refer to as a discount function. There are three steps in carrying out estimation:

Estimation of the historical data weight, denoted \(\hat{\alpha}\), via the discount function

Estimation of the posterior distribution of the current data, conditional on the historical data weighted by \(\hat{\alpha}\)

If a two-arm clinical trial, estimation of the posterior treatment effect, i.e., treatment versus control

Throughout this vignette, we use the terms `current`

, `historical`

, `treatment`

, and `control`

. These terms are used because the model was envisioned in the context of clinical trials where historical data may be present. Because of this terminology, there are 4 potential sources of data:

Current treatment data: treatment data from a current study

Current control data: control (or other treatment) data from a current study

Historical treatment data: treatment data from a previous study

Historical control data: control (or other treatment) data from a previous study

If only treatment data is input, the function considers the analysis a one-arm trial. If treatment data + control data is input, then it is considered a two-arm trial.

In the first estimation step, the historical data weight \(\hat{\alpha}\) is estimated. In the case of a two-arm trial, where both treatment and control data are available, an \(\hat{\alpha}\) value is estimated separately for each of the treatment and control arms. Of course, historical treatment or historical control data must be present, otherwise \(\hat{\alpha}\) is not estimated for the corresponding arm.

When historical data are available, estimation of \(\hat{\alpha}\) is carried out as follows. Let \(y\) and \(N\) denote the number of events and sample size of the current data, respectively. Similarly, let \(y_0\) and \(N_0\) denote the number of events and sample size of the historical data, respectively. Let \(a_0\) and \(b_0\) denote the rate parameters of a Beta distribution. Then, the posterior distributions of the event rates for current and historical data, under vague (flat) priors are

\[ \tilde{\theta}\mid y,N \sim \mathcal{B}eta\left(y+a_0,\,N-y+b_0 \right)\] and

\[ \theta_0\mid y_0,N_0 \sim \mathcal{B}eta\left(y_0+a_0,\,N_0-y_0+b_0 \right),\] respectively. We next compute the posterior probability \(p = Pr\left(\tilde{\theta} \lt \theta_0\mid y, N, y_0, N_0\right)\). Finally, for a discount function, denoted \(W\), \(\hat{\alpha}\) is computed as \[ \hat{\alpha} = \alpha_{max}\cdot W\left(p, \,w\right),\,0\le p\le1, \] where \(w\) may be one or more parameters associated with the discount function and \(\alpha_{max}\) scales the weight \(\hat{\alpha}\) by a user-input maximum value. More details on the discount functions are given in the discount function section below.

There are several model inputs at this first stage. First, the user can select the discount function type via the `discount_function`

input (see below). Next, choosing `fix_alpha=TRUE`

forces a fixed value of \(\hat{\alpha}\) (at the `alpha_max`

input), as opposed to estimation via the discount function. In the next modeling stage, a Monte Carlo estimation approach is used, requiring several samples from the posterior distributions. Thus, the user can input a sample size greater than or less than the default value of `number_mcmc=10000`

. Finally, the Beta rate parameters can be changed from the defaults of \(a_0=b_0=1\) (`a0`

and `b0`

inputs).

An alternate Monte Carlo-based estimation scheme of \(\hat{\alpha}\) has been implemented, controlled by the function input `method="mc"`

. Here, instead of treating \(\hat{\alpha}\) as a fixed quantity, \(\hat{\alpha}\) is treated as random. First, \(p\), is computed as

\[ \begin{array}{rcl}
v^2 & = & \displaystyle{\tilde{\theta}\left(1-\tilde{\theta}\right)/N} ,\\
\\
v^2_0 & = & \displaystyle{\theta_0\left(1-\theta_0\right)/N_0} ,\\
\\
Z & = & \displaystyle{\frac{\left|\tilde{\theta}-\theta_0\right|}{\sqrt{v^2 + v^2_0}}} ,\\
\\
p & = & 2\left(1-\Phi\left(Z\right)\right),
\end{array}
\] where \(\Phi\left(x\right)\) is the \(x\)th quantile of a standard normal (i.e, the `pnorm`

R function). Here, \(v^2\) and \(v^2_0\) are estimates of the variances of \(\tilde{\theta}\) and \(\theta_0\), respectively. Next, \(p\) is used to construct \(\hat{\alpha}\) via the discount function. Since the values \(Z\) and \(p\) are computed at each iteration of the Monte Carlo estimation scheme, \(\hat{\alpha}\) is computed at each iteration of the Monte Carlo estimation scheme, resulting in a distribution of \(\hat{\alpha}\) values.

There are currently three discount functions implemented throughout the `bayesDP`

package. The discount function is specified using the `discount_function`

input with the following choices available:

`identity`

(default): Identity.`weibull`

: Weibull cumulative distribution function (CDF);`scaledweibull`

: Scaled Weibull CDF;

First, the identity discount function (default) sets the discount weight \(\hat{\alpha}=p\).

Second, the Weibull CDF has two user-specified parameters associated with it, the shape and scale. The default shape is 3 and the default scale is 0.135, each of which are controlled by the function inputs `weibull_shape`

and `weibull_scale`

, respectively. The form of the Weibull CDF is \[W(x) = 1 - \exp\left\{- (x/w_{scale})^{w_{shape}}\right\}.\]

The third discount function option is the Scaled Weibull CDF. The Scaled Weibull CDF is the Weibull CDF divided by the value of the Weibull CDF evaluated at 1, i.e., \[W^{\ast}(x) = W(x)/W(1).\] Similar to the Weibull CDF, the Scaled Weibull CDF has two user-specified parameters associated with it, the shape and scale, again controlled by the function inputs `weibull_shape`

and `weibull_scale`

, respectively.

Using the default shape and scale inputs, each of the discount functions are shown below.

In each of the above plots, the x-axis is the stochastic comparison between current and historical data, which weâ€™ve denoted \(p\). The y-axis is the discount value \(\hat{\alpha}\) that corresponds to a given value of \(p\).

An advanced input for the plot function is `print`

. The default value is `print = TRUE`

, which simply returns the graphics. Alternately, users can specify `print = FALSE`

, which returns a `ggplot2`

object. Below is an example using the discount function plot:

```
p1 <- plot(fit02, type="discount", print=FALSE)
p1 + ggtitle("Discount Function Plot :-)")
```

With \(\hat{\alpha}\) in hand, we can now estimate the posterior distribution of the current data event rate. Using the notation of the previous section, the posterior distribution is \[\theta \sim \mathcal{B}eta\left(y+y_0\hat{\alpha}+a_0,\, N-y+\hat{\alpha}(N_0-y_0)+b_0 \right).\] At this model stage, we have in hand `number_mcmc`

simulations from the augmented event rate distribution. If there are no control data, i.e., a one-arm trial, then the modeling stops and we generate summaries of the posterior distribution of \(\theta\). Otherwise, if there are control data, we proceed to a third step and compute a comparison between treatment and control data.

This step of the model is carried out on-the-fly using the `summary`

or `print`

methods. Let \(\theta_T\) and \(\theta_C\) denote posterior event rate estimates of the treatment and control arms, respectively. Currently, the implemented comparison between treatment and control is the difference, i.e., summary statistics related to the posterior difference: \(\theta_T - \theta_C\). In a future release, we may consider implementing additional comparison types.

The data inputs for `bdpbinomial`

are `y_t`

, `N_t`

, `y0_t`

, `N0_t`

, `y_c`

, `N_c`

, `y0_c`

, and `N0_c`

. The data must be input as (`y`

, `N`

) pairs. For example, `y_t`

, the number of events in the current treatment group, must be accompanied by `N_t`

, the sample size of the current treatment group. Historical data inputs are not necessary, but using this function would not be necessary either.

**At the minimum, y_t and N_t must be input**. In the case that only

`y_t`

and `N_t`

are input, the analysis is analogous to using `prop.test`

. Each of the following input combinations are allowed:- (
`y_t`

,`N_t`

) - one-arm trial - (
`y_t`

,`N_t`

) + (`y0_t`

,`N0_t`

) - one-arm trial - (
`y_t`

,`N_t`

) + (`y_c`

,`N_c`

) - two-arm trial - (
`y_t`

,`N_t`

) + (`y0_c`

,`N0_c`

) - two-arm trial - (
`y_t`

,`N_t`

) + (`y0_t`

,`N0_t`

) + (`y_c`

,`N_c`

) - two-arm trial - (
`y_t`

,`N_t`

) + (`y0_t`

,`N0_t`

) + (`y0_c`

,`N0_c`

) - two-arm trial - (
`y_t`

,`N_t`

) + (`y0_t`

,`N0_t`

) + (`y_c`

,`N_c`

) + (`y0_c`

,`N0_c`

) - two-arm trial

Suppose we have historical data with `y0_t=25`

events out of a sample size of `N0_t=250`

patients. This gives a historical event rate of 0.1. Now, suppose we have current data with `y_t=15`

events out of a sample size of `N_t=200`

patients, giving an event rate of 0.075. To illustrate the approach, letâ€™s first give full weight to the historical data. This is accomplished by setting `alpha_max=1`

and `fix_alpha=TRUE`

as follows:

```
set.seed(42)
fit1 <- bdpbinomial(y_t = 15,
N_t = 200,
y0_t = 25,
N0_t = 250,
alpha_max = 1,
fix_alpha = TRUE,
method = "fixed")
summary(fit1)
```

```
##
## One-armed bdp binomial
##
## Current treatment data: 15 and 200
## Historical treatment data: 25 and 250
## Stochastic comparison (p_hat) - treatment (current vs. historical data): 0.3664
## Discount function value (alpha) - treatment: 1
## 95 percent CI:
## 0.0663 0.1194
## sample estimates:
## 0.0902
```

Based on the `summary`

output of `fit1`

, we can see that the value of `alpha`

was held fixed at 1. The resulting (augmented) event rate was estimated at 0.0902 which is approximately the event rate if we combined the historical and current data together, i.e., `(15 + 25) / (200 + 250) = 0.089`

. Note that the `print`

and `summary`

methods result in the same output.

Now, letâ€™s relax the constraint on fixing `alpha`

at 1. Weâ€™ll also take this opportunity to describe the output of the plot method.

```
set.seed(42)
fit1a <- bdpbinomial(y_t = 15,
N_t = 200,
y0_t = 25,
N0_t = 250,
alpha_max = 1,
fix_alpha = FALSE,
method = "fixed")
summary(fit1a)
```

```
##
## One-armed bdp binomial
##
## Current treatment data: 15 and 200
## Historical treatment data: 25 and 250
## Stochastic comparison (p_hat) - treatment (current vs. historical data): 0.3664
## Discount function value (alpha) - treatment: 0.3664
## 95 percent CI:
## 0.0566 0.1211
## sample estimates:
## 0.085
```

When `alpha`

is not constrained to one, it is estimated based on a comparison between the current and historical data. We see that the stochastic comparison, `p_hat`

, between historical and control is 0.3664. Here, `p_hat`

is the posterior probability of the comparison between current and historical data. With the present example, `p_hat = 0.3664`

implies that the current and historical event rates are moderately different. The result is that the weight given to the historical data is shrunk towards zero. Thus, the estimate of `alpha`

from the discount function is 0.3664, and the augmented posterior estimate of the event rate moves up from 0.075 observed in the current data to a value closer to 0.089.

Many of the the values presented in the `summary`

method are accessible from the fit object. For instance, `alpha`

is found in `fit1a$posterior_treatment$alpha_discount`

and `p_hat`

is located at `fit1a$posterior_treatment$p_hat`

. The `sample estimates`

and CI are computed at run-time. The results can be replicated as:

```
mean_augmented <- round(median(fit1a$posterior_treatment$posterior),4)
mean_augmented
```

`## [1] 0.085`

```
CI95_augmented <- round(quantile(fit1a$posterior_treatment$posterior, prob=c(0.025, 0.975)),4)
CI95_augmented
```

```
## 2.5% 97.5%
## 0.0566 0.1211
```

Finally, weâ€™ll explore the `plot`

method.

`plot(fit1a, type="posteriors")`

`plot(fit1a, type="density")`

`plot(fit1a, type="discount")`

The top plot displays three density curves. The blue curve is the density of the historical event rate, the green curve is the density of the current event rate, and the red curve is the density of the current event rate augmented by historical data. Since little weight was given to the historical data, the current and posterior event rates essentially overlap.

The middle plot simply re-displays the posterior event rate.

The bottom plot displays the discount function (solid curve) as well as `alpha`

(horizontal dashed line) and `p_hat`

(vertical dashed line). In the present example, the discount function is the identity.

On to two-arm trials. In this package, we define a two-arm trial as an analysis where a current and/or historical control arm is present. Suppose we have the same treatment data as in the one-arm example, but now we introduce control data: `y_c = 15`

, `N_c = 200`

, `y0_c = 20`

, and `N0_c = 250`

. This control data gives a current and historical event rate of `20/250 = 0.08`

.

Before proceeding, it is worth pointing out that the discount function is applied separately to the treatment and control data. Now, letâ€™s carry out the two-arm analysis using default inputs:

```
set.seed(42)
fit2 <- bdpbinomial(y_t = 15,
N_t = 200,
y0_t = 25,
N0_t = 250,
y_c = 20,
N_c = 250,
y0_c = 20,
N0_c = 250,
method = "fixed")
summary(fit2)
```

```
##
## Two-armed bdp binomial
##
## Current treatment data: 15 and 200
## Current control data: 20 and 250
## Historical treatment data: 25 and 250
## Historical control data: 20 and 250
## Stochastic comparison (p_hat) - treatment (current vs. historical data): 0.3664
## Discount function value (alpha) - treatment: 0.3664
## Stochastic comparison (p_hat) - control (current vs. historical data): 0.9914
## Discount function value (alpha) - control: 0.9914
## alternative hypothesis: two.sided
## 95 percent CI:
## -0.0347 0.0453
## sample estimates:
## prop 1 prop2
## 0.08 0.08
```

The `summary`

method of a two-arm analysis is slightly different than a one-arm analysis. First, we see `p_hat`

and `alpha`

reported for the control data. In the present analysis, the current and historical control data have event rates that are very close, thus the historical control data is given full weight. This implies that the (augmented) posterior control event rate is approximately `(20 + 20)/(250 + 250) = 0.08`

. Again, moderate weight is given to the historical treatment data, so we have an (augmented) posterior treatment event rate of 0.08.

The CI is computed at run time and is the interval estimate of the difference between the posterior treatment and control event rates. With a 95% CI of `(-0.0347, 0.0453)`

, we would conclude that the treatment and control arms are not significantly different.

The `plot`

method of a two-arm analysis is slightly different than a one-arm analysis as well:

`plot(fit2, type="posteriors")`

`plot(fit2, type="density")`

`plot(fit2, type="discount")`

Each of the three plots are analogous to the one-arm analysis, but each plot now presents additional data related to the control arm.