`superb`

In this vignette, we show how the Cohen’s \(d_p\) can be illustrated. See Goulet-Pelletier & Cousineau (2018); Cousineau & Goulet-Pelletier (2020) for comprehensive reviews.

The Cohen’s \(d_p\), also known as
the *standardized mean difference* (smd), is a standardized
measure of effect size for pairwise conditions. It is standardized using
the standard deviation, so that it ressemble a *z* scores. Often,
the sign of the Cohen’s \(d_p\) is
removed, but it could be positive or negative; it is not bounded but
usually, it is smaller than 1.

As an example, a Cohen’s \(d_p\) of 0.5 indicates that the two group’s means are separated by 0.5 standard deviations. If you illustrate the two populations with normal, bell-shape, curves, then their mode would be visibly separated, indicating a sizeable difference between the two populations. Cohen would call this a medium effect (although in my opinion, this is already a large effect; any non-trivially small samples would find this difference significant). With a Cohen’s \(d_p\) of 0.25, it is harder to see a difference between the two populations.

This descriptive statistic is computed from two groups (or two repeated measures) with

\[ d_p = \frac{\vert \; M_1 - M_2 \; \vert}{S_p} \]

where \(S_p\) is the *pooled
standard deviation* across the two group’s standard deviations.

Illustrating this measure with a plot is difficult as it is a
pairwise statistic. For example, if there is 5 groups, that represents
15 *pairs* of groups and consequently, 15 Cohen’s \(d_p\).

Here, we propose an alternative representation through an indirect statistic, using \(d_1\) (Goulet-Pelletier & Cousineau, 2018). It is given by

\[ d_1 = \frac{\vert \; M_1 - B \; \vert}{S_1} \]

where \(S_1\) is the standard
deviation in the group (here labeled “1”). The quantity \(B\) is a baseline measure. It can be any
value based on prior knowledge of the measure (for example, if the
measures are IQ, then \(B\) would be
set to 100). Alternatively, it can also be the **grand
mean** across all the conditions. This is the solution we adopt
herein.

The statistic \(d_1\) is a univariate measure, i.e., it is based on a single group’s data. Hence, in a plot, you could illustrate one \(d_1\) per group.

Why is it interesting? The point is that the difference between two \(d_1\) is the Cohen’s \(d_p\)! Likewise, the difference-adjusted confidence interval of \(d_1\) is the same as the confidence interval of a Cohen’s \(d_p\). Hence, in a single plot, it is possible to derive all the Cohen’s \(d_p\) and their significance.

Let’s define this statistic and its confidence interval estimator:

`library(sadists) # for computing confidence intervals of Cohen's d`

`## Warning: le package 'sadists' a été compilé avec la version R 4.1.3`

```
library(superb)
<- function(X) {
d1 # the global variable GM.d1 is obtained from the initializer
mean(X - GM.d1) / sd(X)
}
<- function(X, gamma = .95) {
CI.d1 <- length(X)
n <- qlambdap(1/2-gamma/2, df = n-1, t = d1(X) * sqrt(n) )
dlow <- qlambdap(1/2+gamma/2, df = n-1, t = d1(X) * sqrt(n) )
dhig c(dlow, dhig) / sqrt(n)
}
```

In that function, we have the variable `GM.d1`

which
represents the grand mean over all the condition. We see later how this
variable is initialized.

In what follow, I use a randomly-generated data with
`GRD()`

simulating three dosage levels in a between-group
design. The three groups have different means of 50, 51.2 and 52.4 which
should translate into observed \(d_p\)
of about 0.12 (between group 1 and group 2 as well as between group 2
and group 3) as the standard deviation in the population is 10:

```
# let's generate random data with true Cohen's dp
# of 0.12 (groups 1 and 2) and 0.24 (groups 1 and 3)
<- GRD( BSFactors = "Dose(3)",
dta RenameDV = "score",
Effects = list("Dose" = custom(0, 1.2, 2.4)),
SubjectsPerGroup = 500,
Population = list( mean = 50, stddev = 10)
)
```

If we set manually `GM.d1`

to the grand mean, we are ready
to make a plot. Alternatively, we can create an
**initializer** that will be run by
`superbPlot()`

automatically. Here it is:

```
# the exact formulas for Cohen's d1 and dp. Only d1 is used in the plot
<- function(df) {
init.d1 <<- mean(df$DV) # will make d1 relative to the grand mean
GM.d1 }
```

It will be run from the `rawData`

data frame (generated by
`superbPlot()`

; check `superbData()`

if you want
to access that data frame) in which the measures are collated in the
column `DV`

.

Now let’s make the plot, feeding `d1`

as the statistic
function:

```
# show a plot with Cohen's d1 and difference-adjusted confidence intervals of d1
superbPlot(dta,
BSFactors = "Dose", variables = "score",
statistic = "d1", errorbar = "CI",
gamma = 0.95,
plotStyle = "line",
adjustments = list(purpose="difference")
+ theme_light(base_size = 10) +
) coord_cartesian( ylim = c(-0.3,+0.45) ) +
labs(title = "d_1 with difference-adjusted 95% confidence intervals of d_1",
y = "d_1 relative to grand mean")
```

`## superb::FYI: Running initializer init.d1`

The difference between two \(d_1\)
is the Cohen’s \(d_p\) and the
difference-adjusted confidence intervals are adequate to compare two
\(d_p\). For example, the \(d_1\) of the first group is not
**included** in the third group’s \(d_1\) which indicates that the Cohen’s
\(d_p\) is significantly different from
zero.

Note that in the above, the initializer was detected and run automatically. You can check that the initializer is detectable with

`:::has.init.function("d1") superb`

`## [1] TRUE`

To check the above, we could implement the formulas for the Cohen’s \(d_p\) (Cousineau & Goulet-Pelletier, 2020):

```
<- function(X, Y) {
dp mean(X - Y) / sqrt((length(X)*var(X) + length(Y)*var(Y))/(length(X)+length(Y)-2))
} <- function(X, Y, gamma = .95) {
CI.dp = length(X)
n1 = length(Y)
n2 = hmean(c(n1, n2))
n <- qlambdap(1/2-gamma/2, df = n1+n2-2, t = dp(X, Y) * sqrt(n/2) )
dlow <- qlambdap(1/2+gamma/2, df = n1+n2-2, t = dp(X, Y) * sqrt(n/2) )
dhig c(dlow, dhig) / sqrt(n/2)
}
```

Let’s extract the group’s data for intermediate computations:

```
<- dta$score[dta$Dose==1]
grp1 <- dta$score[dta$Dose==2]
grp2 <- dta$score[dta$Dose==3] grp3
```

so that we can easily compute all three pairwise statistics:

```
<- round(dp(grp2, grp1), 3)
dp12 <- round(dp(grp3, grp1), 3)
dp13 <- round(dp(grp3, grp2), 3)
dp23 c(dp12, dp13, dp23)
```

`## [1] 0.141 0.261 0.117`

… and their 95% confidence intervals:

```
= round(CI.dp(grp2, grp1, 0.95), 3)
cidp12 = round(CI.dp(grp3, grp1, 0.95 ), 3)
cidp13 = round(CI.dp(grp3, grp2, 0.95 ), 3)
cidp23 c(cidp12,cidp13,cidp23)
```

`## [1] 0.017 0.266 0.137 0.386 -0.007 0.241`

Let’s put these numbers on the plot for easier examination using the
graphic directives `showSignificance()`

:

```
superbPlot(dta, BSFactors = "Dose", variables = "score",
statistic = "d1", errorbar = "CI", gamma = 0.95,
plotStyle = "line",
adjustments = list(purpose="difference")
+ theme_light(base_size = 10) +
) coord_cartesian( ylim = c(-0.3,+0.45) ) +
labs(title = "d_1 with difference-adjusted 95% confidence intervals of d_1",
caption = paste("Note: Cohen's d_p and its confidence interval computed with the \n",
"true formula (Cousineau & Goulet-Pelletier, 2020)"),
y = "d_1 relative to grand mean") +
showSignificance(c(1,2), 0.3, -0.01,
paste("dp = ",dp12, ifelse(sign(cidp12[1])==sign(cidp12[2]),", p < .05",", p > .05")) ) +
showSignificance(c(1,3), 0.4, -0.01,
paste("dp = ",dp13, ifelse(sign(cidp13[1])==sign(cidp13[2]),", p < .05",", p > .05"))) +
showSignificance(c(2,3), -0.25, +0.01,
paste("dp = ",dp23, ifelse(sign(cidp23[1])==sign(cidp23[2]),", p < .05",", p > .05")))
```

In the above, we used the fact that if both limits of the confidence interval are of the same sign, then they are on the same side with respect to zero, and therefore, excludes zero at a significance level of at least 5% (for 95% confidence intervals).

Let’s examine how good the difference-adjusted CI of \(d_1\) are compared to the CI of \(d_p\). The following function (a) get the length of the Cohen’s \(d_p\) interval; (b) average (in the square sense, see here) the two difference-adjusted confidence intervals of \(d_1\):

```
<- function(g1, g2) {
compareCIlength # compute the Cohen's dp confidence interval length
= round(CI.dp(g1, g2)[2]-CI.dp(g1, g2)[1], 3)
cilength.dp
# compute two d1 CI length, difference-adjusted
= sqrt(2)*(CI.d1(grp1)[2] - CI.d1(grp1)[1])
len1 = sqrt(2)*(CI.d1(grp2)[2] - CI.d1(grp2)[1])
len2 # average in the square sense the two d1 CI lengths
= round(sqrt((len1^2 + len2^2)/2), 3)
cilength.d1
data.frame( dp.length = cilength.dp, d1.average.length = cilength.d1)
}
compareCIlength(grp1,grp2)
```

```
## dp.length d1.average.length
## 1 0.248 0.248
```

`compareCIlength(grp1,grp3)`

```
## dp.length d1.average.length
## 1 0.249 0.248
```

`compareCIlength(grp2,grp3)`

```
## dp.length d1.average.length
## 1 0.248 0.248
```

As seen, there is no difference until the third decimal. The small difference comes from the fact that the degrees of freedom are separated, not pooled.

Cousineau, D., & Goulet-Pelletier, J.-C. (2020). *A review of
five techniques to derive confidence intervals with a special attention
to the Cohen’s dp in the between-group design*.
PsyArXiv. https://doi.org/10.31234/osf.io/s2597

Goulet-Pelletier, J.-C., & Cousineau, D. (2018). A review of effect
sizes and their confidence intervals, Part I:
The Cohen’s d family. *The Quantitative Methods for
Psychology*, *14*(4), 242–265. https://doi.org/10.20982/tqmp.14.4.p242